Polaris Ranger XP 900 RackBoss 2.0 Rack and Pinion

Description RackBoss 2.0 Is the Best Rack We’ve Ever Made The more abuse you put your Ranger through, the less responsive your steering gets. Support your steering by upgrading to SuperATV’s Polaris Ranger XP 900 RackBoss 2.0 Rack and Pinion. It’s an upgraded version of our original RackBoss that uses X24 Tech—a unique dual-bushing design that reduces wear by over 50%. It’s built for the big tires and wicked terrain that would sideline most rigs. Boosted Durability with a Dual-Bushing Design RackBoss 2.0 removes almost all unwanted internal play by using our X24 dual bushing design. With heavy-duty PTFE bushings positioned at both ends of the rack, the rack gear and tension spring are nearly motionless. Without extra play, you can ride harder with bigger, heavier upgrades and still see less wear than a stock Honda 1000R steering rack. That durability is boosted even more with the inclusion of a grease zerk that makes it easy to keep it running smooth. Swaged Tube Tie Rods These steel swaged tube tie rods are lightweight but super tough. The flared- out, swaged design boosts the strength of the 7/8” diameter tubing. They’re bolstered with better tie rod ends too. They have huge 16 mm rack threads and 14 mm rod threads that make them the toughest in the industry. They’ll keep you on track where others fail. Solid Steel Bar Tie Rods Our solid steel tie rods are made with 1” diameter bar and paired with our industry-leading chromoly tie rod ends. Our heim joint ends use massive 3/4” threads to make them as beefy as possible, and our rebuildable inner ball and sockets have 16 mm rack threads to bolster durability. With all that strength, you can ride better and longer than ever. RackBoss 2.0 Swaged Tie Rod RackBoss 2.0 Solid Steel Tie Rod X24 Tech Dual- Bushing Design ✔ ✔ Inner Ball and Socket Thread Diameter 14 mm rod threads, 16 mm rack threads 3/4” rod threads, 16 mm rack threads Outer Tie Rod End Thread Diameter 14 mm 3/4” Tie Rod Material Steel tube Solid steel bar Greasable ✔ ✔ Inner Boots ✔ ✔ Steering Stop Kit ✔ ✔ Misalignment Bushings, Tie Rod Studs, & Hardware ✔ ✔ Patent No. 11,345,393 FEATURE Heavy-duty dual PTFE bushings: Designed with X24 Tech Prevents wear Reduces slop Improves overall durability Available tie rod options: Swaged steel tube Solid steel bar Solid steel uses: 3/4” outer tie rod ends Rebuildable inner tie rod ends that use 3/4” rod threads and 16 mm rack threads Swaged tube tie rods use: 14 mm outer tie rod ends Rebuildable inner tie rod ends that use 14 mm rod threads and 16 mm rack threads 65% larger housing than stock Over 50% less wear than OEM after 15,000 cycles Grease fitting for rack gears Fitment Polaris Ranger XP 900 : 2013-2019 Polaris Ranger XP 900 High Lifter Edition : 2016 Replaces OEM Part#: 1823902