Ultimate Magic Card (GEN4) – Multi-Emulator All-In-One RFID Card

The Ultimate Magic Card (Gen4) has the ability for its ATQA/SAK/ATS/byte length/card number (UID)/M1 area size of any card can be modified, without any restrictions. It can read and write any block like UID card without password. It can also be transformed into an Ultralight card. The card also supports rolling code recovery card mode, even after key modification.At the same time, it is also has a 14B card with a card number which can be modified. The card backdoor command supports setting a password. If the password is incorrect, the card configuration cannot be modified. If the card encounters abnormal interference, it will enter the recovery mode, which can be reconfigured and greatly reduces the chance of your card being damaged.Configurable Card TypesThe Ultimate Magic Card contains presets of multiple card types:MIFARE MiniMIFARE 1k S50 4 byte UIDMIFARE 1k S50 7 byte UIDMIFARE 1k S50 10 byte UIDMIFARE 4k S70 4 byte UIDMIFARE 4k S70 7 byte UIDMIFARE 4k S70 10 byte UIDUltralightUltralight-CUltralight Ev1NTAGAs below, all ATQA/ATS/ATS values are freely configurable allowing for emulation of other or custom chipsetsConfigurable ParametersThe card supports configuration of the following parameters:Preset Card TypeUIDUID Length (4-byte / 7-byte / 10-byte)SAK (1 byte)ATQA (2 bytes)ATS (Custom length / Disable)Configurable FunctionalityThe card has several modes of operation, depending on your requirementsShadow Mode Shadow Mode, or “Write once then forget” mode, allows the card to be pre-configured with data. When next updated (ie, via a card reader / access control reader), modifications are temporarily maintained. The modified data can be read once, and then the card reverts to its pre-configured state. Shadow Mode is purpose built for in-the-field operations. Previously a card would have to be written, used, read and re-written manually; Shadow Mode takes care of this without any additional hardware.Recovery Mode If the card is poorly configured, it can be pushed back into Recovery Mode – preventing unintentional bricking.Auto-BCC Calculation The card automatically calculates BCC values, saving time and avoiding making the card undetectable.Password Protection / One-Time-Write Emulation Configuration commands can be protected with a customisable password; it will not respond to magic commands or direct writes to restricted values unless the correct password is given, allowing the card to function as a “One-Time-Write” card.Programming Compatibility The card can be programmed on multiple platforms:iCopy-XS (via the menu with LUA scripts) or in PC-ModeProxmark3 RDV4.01 (via manual commands or LUA scripts)LibNFC (via manual commands)Windows Platforms LibNFC reader/writer (via GUI software)TECHNICAL RESOURCESUltimate Magic Card Command DocumentationProxmark / iCopy-XS LUA Script DocumentationWindows FUSE tool – (Recommended) IMPORTANT:KSEC cannot provide support or refunds under any circumstances for cards that were ‘bricked’ due to incorrect usage or cards which have been cloned/re-configured.